Search our Line of Lubricants

All Products TRIBOLUBE 13D17

TRIBOLUBE 13D17

TRIBOLUBE-13D17 is qualified to MIL-PRF-27617, Type 1. TRIBOLUBE-13D17 is one of a series of greases developed for use in mild to low pressure systems where nonreactivity with strong chemicals, strong acids and oxidizers, fuels, and solvents is mandatory. This grease is suited for a temperature range of -75ºF to 300ºF. Although these greases are very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain extreme conditions. TRIBOLUBE-13D17 is available with three different corrosion inhibitors designated by the letters RPA, RPB, & RPC.

TRIBOLUBE-13D17 can be used in electrical contacts, valves, and as an anti-seize thread compound. TRIBOLUBE-13D17 is compatible with elastomeric seals, plastic, gaskets, O-rings, as well as nonreactive with LOX and GOX.

 

Application:

The fuel resistant grease is intended for use in the lubrication of taper plug valves, gaskets, and bearings in fuel systems of military aircraft and ground support equipment. It is also suitable for use in the presence of liquid oxygen as a lubricant for valves, threads, and bearings in aerospace vehicles and supporting equipment. This material may not be suitable for aluminum or magnesium dynamic bearing lubrication because of possible ignition hazards.

Contact Us For More Information
Temperature Range
-75ºF to 300ºF
NLGI Number
2
Unworked Penetration (ASTM D-1403) @ 77ºF
300
Worked Penetration (ASTM D-1403) @ 60 Strokes
305
Evaporation (ASTM D-2595), 22 hrs @ 212ºF
1.45%
Evaporation (ASTM D-2595), 22 hrs @ 300ºF
23.77%
Oil Separation (FED-STD-791, Method 321), 22 hrs @ 212ºF
3.86%
Oil Separation (FED-STD-791, Method 321), 22 hrs @ 300ºF
9.46%
LOX Impact Sensitivity (ASTM D-2512), 20 impacts from 43.3 in
No Reaction
Load Wear Index (ASTM D-2596)
133
Last Non-seizure (ASTM D-2596), Load/Wear Scar
100 kg/ 0.459 mm
Last Seizure (ASTM D-2596), Load/Wear Scar
500 kg/ 1.286 mm
Weld Load (ASTM D-2596), Load
620 kg
Steel-on-Steel Wear (ASTM D-2266), 1,200 rpm, 40 kg, 1 hr, 52100 steel @ 167ºF
0.85 mm
Steel-on-Steel Wear (ASTM D-2266), 1,200 rpm, 40 kg, 2 hrs, 52100 steel @167ºF
1.09 mm
Low Temperature Torque (ASTM D-1478), @ -20ºF, Starting/Running 1 hour
NA
Low Temperature Torque (ASTM D-1478), @ -65ºF, Starting
2,145 g-cm
Low Temperature Torque (ASTM D-1478), Running 1 hour
585 g-cm
Corrosion on Copper (FED-STD-791, Method 5309), 24 hrs @ 212ºF
1 b
Close-up of shiny, yellow lubricant with swirling texture.
About TRIBOLUBE®

Engineered Lubrication Solutions for Demanding Applications

TRIBOLUBE synthetic lubricants are engineered to address complex lubrication challenges in demanding aerospace, industrial, automotive, and energy applications. Designed to perform where conventional lubricants reach their limits, TRIBOLUBE formulations deliver reliable performance under extreme temperatures, high loads, and harsh operating conditions—helping extend component life and support consistent system operation.